9007 Kits and Bulbs

Many vehicle manufacturers use 9007 (also known as HB5) bulbs when their vehicle uses a compact light housing. Halogen 9007 bulbs serve as high and low beams. Likewise we offer 2 types of 9007 HID conversion kits. The kits below offer HID low beams and no high beams.

A true dual-HID conversion kit with HID lows and HID highs is available for the 9007 bulb type here.

To check what kit you will need for your car, please visit Sylvania's bulb replacement guide.

If you have a daytime running light (DRL) system on your low beams, you will need to disable it or bypass it by tapping another 12v source like a parking light. Disabling a DRL system is different for every vehicle. To find information for your particular vehicle please browse LightsOut.org.

All MobileHID conversion kits come with the following:

	2 Bulbs
	2 Ballasts
	1 Pack of zip ties
	2 wire connections for ballast hookups
	1 Set of instructions

Need a rubber injected replacement ballast
for your existing kit?

Pick one up for $60 shipped!
(Don't worry, we don't take them apart before we ship them!)

Need a replacement relay
for your existing kit?
relay
Pick one up for $15 shipped!

9007 3000k Full Kit Not Available	9007 4300k Full Kit $~~250~~ $225 shipped!	9007 5000k Full Kit $~~250~~ $199 shipped!	9007 6000k Full Kit $~~250~~ $199 shipped!	9007 8000k Full Kit $~~250~~ $199 shipped!

Not available

9007 3000k
Replacement Bulbs
$90 shipped!

9007 4300k
Replacement Bulbs
~~$90 shipped!~~
$79.95 shipped

9007 5000k
Replacement Bulbs
~~$90 shipped!~~
$79.95 shipped

9007 6000k
Replacement Bulbs
~~$90 shipped!~~
$79.95 shipped

9007 8000k
Replacement Bulbs
~~$90 shipped!~~
$79.95 shipped

Not available

Consumer note: There are many brands that do not offer safe installation equipment. These inferior HID conversion kits connect directly to your factory wires and put you at risk of damaging your electrical system since HID systems require a single moment of 23,000 volts to ignite. Unless a vehicle has an HID system from the factory, the factory electrical harness is not designed for this level of power which can result in flickering of your lights strobing which can negatively affect the long term usage of your bulbs and ballasts.

If you purchased a kit elsewhere and did not get a harness, protect your vehicle and purchase a harness today. These harnesses are UNIVERSAL and will fit 90% of the ballasts on the market.

Don't believe you need a harness? Check out this McCulloch vendor giving instructions on how to fabricate a relay harness due to multiple problems caused by not having one..

Pick up a harness today and save your electrical system.

9007 Wire Harness
$30 shipped anywhere in the US!

Disclaimer: All HID conversion kits, no matter the source, are not DOT approved if installed outside of the factory. Moreover, in the U.S, this is not street legal for use on public roads. As a result, we officially endorse the kit for exhibition and off-road use and will only sell the kit to be used for these purposes. We are not responsible for buyers who violate the terms of sale. They will assume all responsibilities for any unauthorized or unintended use other than exhibition or off-road use.

Free shipping worldwide on HID kits!