FAQ 
               

 

H1 Kits and Bulbs

Many vehicle manufacturers use H1 bulbs as low beams when coupled with a 9005 bulb for the high beam.

Halogen bulbs operate at 55 watts and have an average life span of 1,000 hours of run time. HID bulbs operate at 35 watts and can last 3-4 times longer.

To check what kit you will need for your car, please visit Sylvania's bulb replacement guide.

If you have a daytime running light (DRL) system on your low beams, you will need to disable it or bypass it by tapping another 12v source like a parking light. Disabling a DRL system is different for every vehicle. To find information for your particular vehicle please browse LightsOut.org.

All MobileHID conversion kits come with the following:

  2 Bulbs
  2 Ballasts
  1 Pack of zip ties
  2 wire connections for ballast hookups
  1 Set of instructions




Click for Credit Card Instructions

Need a rubber injected replacement ballast
for your existing kit?

Pick one up for $60 shipped!
(Don't worry, we don't take them apart before we ship them!)


Need a replacement relay
for your existing kit?
relay
Pick one up for $15 shipped!


H1 3000k
Full Kit
$250
$225 shipped!

H1 4300k
Full Kit
$250
$225 shipped!

H1 5000k
Full Kit
$250
$225 shipped!
H1 6000k
Full Kit
$250
$225 shipped!
H1 8000k
Full Kit
$250
$225 shipped!
3k color temp
4300k color temp
5k color temp
6k color temp
8k color temp
Not Available

H1 3000k
Replacement Bulbs
$90 shipped!

H1 4300k
Replacement Bulbs
$90 shipped

H1 5000k
Replacement Bulbs
$90 shipped
H1 6000k
Replacement Bulbs
$90 shipped
H1 8000k
Replacement Bulbs
$90 shipped
Not Available

Consumer note: There are many brands that do not offer safe installation equipment. These inferior HID conversion kits connect directly to your factory wires and put you at risk of damaging your electrical system since HID systems require a single moment of 23,000 volts to ignite. Unless a vehicle has an HID system from the factory, the factory electrical harness is not designed for this level of power which can result in flickering of your lights strobing which can negatively affect the long term usage of your bulbs and ballasts.

If you purchased a kit elsewhere and did not get a harness, protect your vehicle and purchase a harness today. These harnesses are UNIVERSAL and will fit 90% of the ballasts on the market.

Don't believe you need a harness? Check out this McCulloch vendor giving instructions on how to fabricate a relay harness due to multiple problems caused by not having one..

Pick up a harness today and save your electrical system.

H1 Wire Harness
$30 shipped anywhere in the US!

Disclaimer: All HID conversion kits, no matter the source, are not DOT approved if installed outside of the factory. Moreover, in the U.S, this is not street legal for use on public roads. As a result, we officially endorse the kit for exhibition and off-road use and will only sell the kit to be used for these purposes. We are not responsible for buyers who violate the terms of sale. They will assume all responsibilities for any unauthorized or unintended use other than exhibition or off-road use.

 

 

 

Free shipping worldwide on HID kits!

 

 



 

 



       

Copyright 2006 Panda Power All Rights Reserved