Shop
Home » All Products
The 500 can be mounted on any vehicle and is best for long distance illumination.
When we tested the 500 in the field, we actually had to use Google maps to check the distance between the machine it was on and the building we were lighting up. The building was 1,000 feet away.
The one-piece design ensures water resistant functionality and allows for easy installation as an entirely standalone HID unit. With its INTERNAL BALLAST simply connect your power and ground and bolt it into place.
Beam Distance: 300+ yards Lumen Output: 2,500 Power: 35w Beam Pattern: Spot Current Draw: 1.5A @ 12v & 0.75A @ 24v Lens Material: Non-oxidating Glass Housing Material: ABS Plastic Service Life: 3,000 hours Dimensions:Dimensions: 5" wide, 6" deep, 6" tall from mounting point to top of light housing.
This SUPER BRIGHT 48w LED light is the brightest LED light that we carry.
The housing is made of cast aluminum alloy while the lens is a high impact polycarbonate material that will not fade or yellow over time and the mounting bracket is stainless steel. Overall, this thing is rust proof and waterproof and will stand up the harshest of conditions. Because this is a 48w light, the current draw is near 4A on a 12v machine. This will be several times brighter than your halogen bulb AND it will take less power to run. If you need to save even more power, please check out our 35w HID lights. The biggest advantage with LED lights is life span. It's designed to provide 30,000 service hours so you'll be changing machines before you change these LED lights.
Dimensions: 4.3" square and 2.8" thick Beam Distance: ~450ft Lumen Output: 3,840-3,984 Power: 48w Operational Voltage: 12/24v Beam Pattern: 60 Degree Flood Current Draw: 3.8A @ 12v & 1.9A @ 24v Material: Cast Aluminum Service Life: 30,000 hours
Need new ballasts for your HID kit? Here's a pair of our AC 9v-16v 35w HID ballast with AMP bulb connector plugs and a standard 9006/9005 bulb type connecter for power. These ballasts will fit 99% of the HID kits on the market. If you only need ONE ballast, you can pick up a single ballast here.
This slim style ballast can be mounted anywhere with zip ties, double adhesive tape, or in almost any type of light housing if you need to install it into an existing light housing.
Our 27w LED is one of the smallest yet brightest lights we've ever tested! The housing is thicker than the 18w model to accommodate the necessary heat dissipation via a larger heat sink but other than the thickness, it's the same great 4" diameter light that can be fitted nearly ANYWHERE. The beam pattern is remarkably wide as it is designed to be a full flood light. For a full flood light barely drawing any power ( 2.25 Amps!!) that is quite impressive. For this reason, we heavily recommended them for light duty machinery and to compliment the HID work lighting we offer for large machines.
Beam Distance: ~260ft Lumen Output: 2,160-2,250 Power: 27w Beam Pattern: Flood Current Draw: 2.25A @ 12v & 1.125A @ 24v Material: Diecast Aluminum Service Life: 30,000 hours Dimensions: 4" round
If you purchased a low quality HID kit on eBay or Amazon and it failed prematurely, this ballast is for you. Our AC 9v-16v 35w HID ballast has AMP bulb connector plugs and a standard 9006/9005 bulb type connecter for power. It will fit 99% of the HID kits on the market and is a better product than almost every kit that we've tested.
This slim style ballast can be mounted anywhere with zip ties, double adhesive tape, or in almost any type of light housing if you need to install it into an existing light housing. Need two ballasts? Click here.
Two 9005 HID bulbs for John Deere machines and more.
Each package comes with 2 bulbs
In stock and ready to ship with a 1-year full replacement warranty!
Our 18w LED800 is a great bang for the buck LED light. The housing is a little thinner than the 27w model since there is less heat to dissipate but other than the thickness, it's the same great 4" diameter light that can be mounted almost ANYWHERE. The beam pattern is remarkably wide as it is designed to be a full flood light. For a full flood light barely drawing any power (1.5 Amps) that is quite impressive. For this reason, we heavily recommended them for light duty machinery and to compliment the HID work lighting we offer for large machines.
Beam Distance: ~200ft Lumen Output: 1,440-1,500 Power: 18w Beam Pattern: Flood Current Draw: 1.5A @ 12v & 0.75A @ 24v Material: Diecast Aluminum Service Life: 30,000 hours Dimensions: 4" round
If you are going to use an HID kit, protect your vehicle and purchase a harness today.
These harnesses come with a 40amp relay and a 10amp fuse to ensure your factory electrical system is not pushed beyond it's rated limit. Don't believe you need a harness? Check out this McCulloch vendor giving instructions on how to fabricate a relay harness due to multiple problems caused by not having one.
« Previous | 1 | 2 | Next »
30% of customers purchase a Mix 'n Match 4-pack!
17% of customers purchase the 512w
Not logged in
Lighting Products
Wide Angle HID Narrow Angle HID Flood Angle HID Metal Housing HID Lights
Plastic Housing HID Lights HID for John Deere Machines All HID Lights LED Bars
LED Auxiliary Lights LED Flood Lights All LED Lights
Customer Service
Contact Us Shipping Policy FAQ
Company Information
About Careers Our Team Sitemap